Useful Residential Painting Techniques
A lot of residential painters have different styles of painting. The beginners should know that there are certain techniques that should be followed to achieve a good outcome. These techniques will also help in the application of the paint, which can make it last longer on the surface to be painted on. To guide the novices, here are some residential painting techniques that a painter can base his projects from.
1. Keep the wedge wet and you should always remember to paint from dry to wet in order to minimize the amount of roller marks and brush strokes.
2. Do not stretch the paint that you are using. Although you do not want to glob the paint, scrimping would also leave the surface with a blotchy or patchy kind of paint job.
3. Taping can be an option, most especially if you cannot paint steadily. Use an angle brush and begin a little bit away from the edge, in which you can curve in so you can meet it. This would prevent you from leaving a huge blob of paint that you have began with.
4. It would be a good idea to hold the brush in a narrow way, which is most probably not your natural way of holding it. This would make it easier for you to get a crisp line when you will be painting the trim.
5. The best way to accomplish in painting a room is to first cut in. Paint along the ceiling, trim and the corners with the use of a brush. When your coat of paint has dried, you can start painting the rest of the walls with the use of a roller.
6. It does not actually matter which one you paint first, the trims or the walls first; however, there are some people who would prefer to paint the trim first since the walls appear to have a cleaner line when they get to cut in to cover the walls. If you would prefer to tape off the edges, then it would be more convenient to paint the trim last.
7. Make your brush wet and make sure to blot the excess water before you can start painting. This would prevent the paint from creeping up onto the ferrule, which is the metal part of the brush where the bristles are attached. Once the paint creeps onto that area, your bristles may come off and might stick onto the surface that you are painting on and leave marks.
8. When you dip into the paint, dip your brush only for a half or a quarter of 1 inch then wipe one side on the paint containers edge. This can prevent paint runs, if you have gathered too much paint and keep your paint brush in a good condition.
9. It is important to paint in long and continuous strokes only. Otherwise, this can become one of your major mistakes in painting.
10. If you will be using a roller for painting, you should aim to cover a three foot wide section one at a time. Some people would usually go from the ceiling until a midway point, then get more paint; start from the midway point then down to the floor. Moving to the next section would make them move from the left to the right while keeping a wet edge and working from a dry part to wet.
1. Keep the wedge wet and you should always remember to paint from dry to wet in order to minimize the amount of roller marks and brush strokes.
2. Do not stretch the paint that you are using. Although you do not want to glob the paint, scrimping would also leave the surface with a blotchy or patchy kind of paint job.
3. Taping can be an option, most especially if you cannot paint steadily. Use an angle brush and begin a little bit away from the edge, in which you can curve in so you can meet it. This would prevent you from leaving a huge blob of paint that you have began with.
4. It would be a good idea to hold the brush in a narrow way, which is most probably not your natural way of holding it. This would make it easier for you to get a crisp line when you will be painting the trim.
5. The best way to accomplish in painting a room is to first cut in. Paint along the ceiling, trim and the corners with the use of a brush. When your coat of paint has dried, you can start painting the rest of the walls with the use of a roller.
6. It does not actually matter which one you paint first, the trims or the walls first; however, there are some people who would prefer to paint the trim first since the walls appear to have a cleaner line when they get to cut in to cover the walls. If you would prefer to tape off the edges, then it would be more convenient to paint the trim last.
7. Make your brush wet and make sure to blot the excess water before you can start painting. This would prevent the paint from creeping up onto the ferrule, which is the metal part of the brush where the bristles are attached. Once the paint creeps onto that area, your bristles may come off and might stick onto the surface that you are painting on and leave marks.
8. When you dip into the paint, dip your brush only for a half or a quarter of 1 inch then wipe one side on the paint containers edge. This can prevent paint runs, if you have gathered too much paint and keep your paint brush in a good condition.
9. It is important to paint in long and continuous strokes only. Otherwise, this can become one of your major mistakes in painting.
10. If you will be using a roller for painting, you should aim to cover a three foot wide section one at a time. Some people would usually go from the ceiling until a midway point, then get more paint; start from the midway point then down to the floor. Moving to the next section would make them move from the left to the right while keeping a wet edge and working from a dry part to wet.
Source...