Directions to Put a Safety First Play Yard Together
- 1). Take the play yard out of its travel case.
- 2). Unhook the straps that hold the mattress to the play yard around the play yard system. Set the mattress aside.
- 3). Spread the play yard out so you can easily grasp the side rails but do not flatten the bottom of the play yard entirely. When the play yard floor is flattened, it prevents the side rails from locking during installation.
- 4). Grasp the center of one side rail and pull it up with a sharp tug. You'll feel the rail lock into position. Repeat this with the remaining rails until all are locked. If you're not able to lock the rails, lift the floor of the play yard higher and try again.
- 5). Push down on the center of the play yard to lower the middle feet into place and open the play yard to it's full size.
- 6). Insert the mattress with the padded side up. Thread the hook and loop tab that's attached to the bottom of the mattress through the slits in the bottom of the play yard and secure them to the hook and loop tape beside the slit. This holds the mattress in place while the play yard is in use.
Source...