How to Make Diaper Tower Centerpieces
- 1). Roll a diaper from the fold line to the end. Secure the roll with a rubber band. Repeat for all the diapers.
- 2). Place the cap on one end of the PVC pipe. This is now the top of the pipe.
- 3). Stand a circle of rolled diapers all the way around the bottom of the PVC pipe. This is the side with no cap. Secure the circle of diapers around the end of the pipe with a rubber band. Stand the pipe and diapers on the plate.
- 4). Make small bundles of six diapers and secure the bundles with rubber bands. Place the bundles around the diapers fastened to the pipe. Fill in any gaps with single rolled diapers. You will need between 30 and 40 diapers for the bottom of the tower depending on the thickness of the diaper.
Cut 2 feet of ribbon. Wrap the ribbon around the bundle and tie in a bow. Adjust the ribbon to cover the rubber bands. - 5). Place a circle of diapers around the protruding pipe. Secure the diapers with a rubber band. Make small bundles of three diapers and place the bundles around the diapers fastened to the pipe. Fill in any gaps with single diapers. Cut 18 inches of ribbon and tie a bow around the center tier of the tower. Adjust the ribbon to cover the rubber bands.
- 6). Wrap eight to 10 diapers around the baby bottle and secure with a large rubber band. Cut an 18-inch piece of ribbon and tie it around the bundle, covering the rubber bands.
- 7). Cut a piece of double-sided tape and stick the tape to the bottom of the bottle. Stick the other side of the tape to the cap on top of the PVC pipe.
- 8). Cut two 12-inch pieces of thin ribbon and tie the pacifier and the rattle to the tower wherever it pleases you.
Source...