Cell Phone Cover Instructions
- 1). Lay all cell cover pieces side by side. Find the cover piece that has a wide hole or opening and several smaller holes. This is your front piece, which will always leave the keypad, keys on the face of your phone, and trackball--if you have one--exposed and accessible for your uninterrupted use. Set this piece aside; you will return to it later.
- 2). Match the back cover piece(s) with holes that correspond to side keys. One swift snap-in should be all that is required to put a one-piece back cover into place. Two-piece back covers are slightly trickier, as you must first correctly interlock the two adjoining pieces before snapping both into place. To do this, look for indent or protruding grooves on one piece; the other piece will be a mirror image of the first. Line up the grooves accordingly then apply the entire cover to the back of your phone.
- 3). Match the holes on the front cover piece with the corresponding areas on your phone then snap into place. Most front cover pieces consist of one single piece; once you have properly matched the holes, you can snap the cover onto your phone.
Source...