How to Haul a Motorcycle With a 2007 Tundra
- 1). Park the Toyota Tundra on level ground and set the parking brake. Lower the tailgate and place the ramp onto the edge of the tailgate.
- 2). Push the motorcycle to the ramp. Push the motorcycle up the ramp and into the truck bed with the help from your friend.
- 3). Connect one tie-down strap to each handlebar by the hooks on the end of the strap. Connect the opposite ends of the straps to the anchor rings on the frame of the truck bed. Tighten the straps until the front forks compress one-quarter of the way down.
- 4). Connect one tie-down strap to each side of the metal frame of the bike. Connect the opposite ends of the straps to the anchor points on the truck bed. Tighten the straps until no slack is present.
- 5). Remove the motorcycle ramp from the tailgate and slide it into the truck bed. Close the tailgate if you can.
Source...