The main aspect that you have to know is where you are going to put the sump pump basins this is one thing that has to be considered.
You should be aware that there are many pipes that run underground, bear this in mind.
The most preferred location would be a few inches away from walls.
It is vital that you know exactly where your main water supply is.
The chosen spot for any sump pump basins has to be the correct one in terms of installation.
When you have the ideal spot, make an outline of the top side of your basin on the ground.
With a jackhammer, start to cut along the traced lines and make sure that you do not go any wider than the lines that you have drawn.
This process is one that demands patience and time, so make sure that you do just that.
Once the whole area is cut and sorted, you may now go ahead with the chipping of the smaller sharper pieces on the wall.
Make sure that all rubble is removed as well as loose debris.
This is now where the sump pump basins are inserted; you dig the hole in the centre of the pit.
The use of a shovel will make things easier, at the stage that you think your hole is big enough; you may then proceed and insert the basin in.
Ensure that the basin is a height of 2 inches above the ground level.
This level has to be maintained, the idea is get loose gravel and place it into the pit for the basin to for securely.
If the basin is not firm and level, make sure that you set it to the correct position, as this will interfere with further developments.
Be sure that you set the basin in the centre of the pit, as once you place the concrete, it will be a bit difficult for you to make any adjustments then.
The outside area surrounding that sump pump basins has to be smoothed out by means of a towel.
Once you spread the dirt, make sure that you use some of this to close up any open spaces that are available.
The bigger pieces of concrete will not aid at all, what you should do instead, is throwing them away.
When you reach this stage of the plan, make sure that the basin is still up to two inches out of the ground.
At the time that the sump pump basins in place, lay some concrete down and make sure that you smooth it out and let it dry completely before you get the plumbing started.
You may rest knowing that you have completed the most difficult task in this process.
The whole effect that a sump pump will give you is the assurance that you will be guaranteed a dry basement in the event of heavy rainfall and storms.
The main idea is to make sure that the area is all dried and ready to go for the next step.