How to Replace a Stabilizer Bar Control Link
- 1). Park the vehicle on a level, paved surface and set the parking brake.
- 2). Raise the front of the vehicle with a jack and support with jack stands.
- 3). Slide under the front of the vehicle. Use a wrench and a ratchet and socket to remove the nut from the link bolt. Note to the order in which the washers and insulators are attached to the link bolt and link.
- 4). Install the new link with the washers and insulators in the same order as you removed them. Install the bolt and nut. Use your wrench, ratchet and socket to tighten the nut.
Source...