How to Put the Holster in a Keurig B-60
- 1). Identify the K-Cup holster. This is also called the holder. It is a tube about one and a half inches long with a lip around the upper end. The lower end serves as a funnel and has a small opening for the coffee to flow through. The holder fits into the K-Cup holder housing at the top front of the machine.
- 2). Turn on your machine and wait for the LCD display to read "READY TO BREW." Place your coffee cup onto the tray below the K-Cup housing.
- 3). Pull up on the handle of your machine to open the lid. When you do this, the K-Cup housing tilts forward and exposes the K-Cup holster. If your holster isn't already in the unit, insert the holster funnel-end first into the housing so the lip of the holster is upright.
- 4). Place a K-Cup into the holster with the K-Cup's foil lid facing upright. Do not remove the foil lid. The lip of your K-Cup will rest on the lip of the holster.
- 5). Press down on the handle to lower the lid. This closes off the K-Cup housing. Once the housing is sealed the LCD display will read; "READY TO BREW." Select what size cup you have. The machine will begin brewing after you make your selection.
Source...