The stepping stone to a beautiful shed begins from your search for shed construction plans.
Many people face difficulties in their project because they overestimate the scope of their technical abilities and choose a complicated design plan that they cannot comprehend well.
Always keep in pace with your carpentry experience and find something that provides sufficient depth in their instructions that you will be comfortable following.
The rest of this article will highlight the key phases of the construction process that should provide one with a basic structural understanding of each component.
The definition of a good and simple blueprint is one entailing a realistic design with every specific instruction explained in detail.
Find a blueprint that showcases a design that boasts minimal complexity such as over-extensive foundations and difficult cuts or angles.
You can also be on the lookout for something that allows for the flexibility of installing ready-made parts such as rafters and shed doors.
Take note in the materials used for the foundation in the proposed project.
One can utilize pressure-treated or concrete slabs for creating the base foundations of most average-sized projects.
Larger sheds would call for more permanent foundations that are created by filling dug grounds with either pressure-treated posts or concrete piers.
Good shed construction plans should always advocate for using lumber that are pressure-treated.
Do not compromise on the integrity of the floor frame by using untreated lumber as they are likely to decompose quickly.
One can opt for ¾" tongue-and-groove plywood instead of the regular exterior-grade plywood for a firmer floorboard.
It is recommended that one stick with pressure-treated plywood if the area experiences regular moist weather conditions.
The floorboards should always be fastened with galvanized screws.
One can improve air circulation and eliminate excessive moisture build-up by erecting the shed some distance above the ground.
Another good tip is to avoid having any plants or vegetation too close around the structure as they will promote dampness.
Keep the shed in an open area that is unobstructed from direct sunlight.
Having a healthy perimeter of free space around the structure will also allow for more convenient building and repairing works.
It is always easier and recommended to construct roof trusses on the ground and then raising them up into position only after the walls are completed.
A typical setup would see them placed directly on wall studs and spaced out evenly at intervals of 16" from the center.
The process is rather similar for this phase of the project regardless of the different blueprints with the key difference mainly being on the technique used in constructing it.
Windows primarily serve the purpose of allowing light into the interior.
This is especially important if there is no intention of setting up electrical access into the shed.
A typical blueprint would usually suggest two to three windows.
Installing the windows in the right directions will allow for maximum light efficiency.
Keep in mind that too many windows will compromise the space available as the walls can be used for mounting shelves and hanging tools.
Most shed construction plans always keep to having only one door access to the shed.
The exception of having two only applies for bigger sheds where you are likely to store many items and may have difficulty moving items in and out from the facility.