DIY Atomizers
- 1). Find bottles that can be used to hold the liquid that will be sprayed. These bottles can be old atomizer bottles, glass bottles with a screw lip or any other bottle that is handy. Make sure the bottle is completely clean before filling it. If the bottle once held cleaning liquid then do not fill it with olive oil, perfume or other products. Traces of chemicals can cause problems. Glass bottles are the easiest to clean thoroughly and can be reused easily.
- 2). Cut the plastic straw with a knife or scissors to create a hinge at the center. Do not cut through the straw completely.
- 3). Bend the straw to create a 90-degree angle. The bend will occur where you made the cut.
- 4). Fill the bottle with the desired liquid.
- 5). Lower the vertical part of the bent straw into the liquid. The other part of the straw will be parallel with the ground.
- 6). Position yourself and the atomizer, so the straw hinge is pointed towards the object you want to spray.
- 7). Take a deep breath and blow through the horizontal straw at the open end.
- 8). Blow with different intensities until you achieve the desired spray. Blowing harder or more weakly will change the speed and amount of spray.
Source...