The Evolution Of LEDs - Greater Energy Efficiency and More Competitive Pricing
Since the commercial induction of LED lights by GE since 1976, the lighting industry has been seriously working on the technology.
One LED fixture manufacturer manufactures one thing, the other competitor steps into another new innovation, such as OLED, Organic Light Emitting Diode.
These sources of lighting are called Solid State technology, on the process of replacing all tungsten filament light technology in very few coming years.
There are certain limitations still ahead of the manufactures before they clean sweep the filament type bulbs.
But even right now, a massive replacement has already been made by the many.
Every manufacturer is in technological race with the other, one who succeeds in the innovation and removing of any past issue, makes ahead away towards a bulk manufacturing and bulk purchase which in return brings down the development cost.
Low cost, more innovative advantage and head away brings more customers, as everybody on this world is thinking seriously over the savings from power cuts.
Thos who will stay behind in the innovative research and development will be left far behind.
The answer is simple.
The energy crisis is global all over the world.
Every one is seeking first to save more and achieve more, similarly the producers are in a race to make the people help save more and they sell more, and the answer to them is only one, a breakthrough in the technological innovation and be able to address all the technical issues and limitations prevailing now or than at the moment.
The relevancy and the relations of some factors are given below: More demand of energy saving and efficient hardware, brings out more demand, more demand brings out the innovative research, which brings out need to produce more to be able to meet the demand before anybody else does, thus if satisfaction confirmed from the later, more competitive pricing has to be set, because quite parallel to ones research, all competitors have stepped into the same.
Another factor which is of importance is relevant to colder areas where the demand of LED's have increase many folds in spite of all prevailing technical barriers.
LEDs can start emitting light even at -40 degrees C.
Therefore in the most severe conditions also LED keeps on providing where others fail.
As we were discussing the competitiveness, the outdoor use was one of the first concerns for illumination application to gain a foothold in the product segment.
One manufacturer developed a "Light engine", this is what he calls his light, can produce an output of 80 lumens per watt.
Examining the cost of revamping of street lights with HID lamps with a life of 15000 to 25000 hours, the mean time to revamp the replacement could be three times greater that life.
Here we see that added cost of the LED is recovered over time in reduction of lamp maintenance cost.
One LED fixture manufacturer manufactures one thing, the other competitor steps into another new innovation, such as OLED, Organic Light Emitting Diode.
These sources of lighting are called Solid State technology, on the process of replacing all tungsten filament light technology in very few coming years.
There are certain limitations still ahead of the manufactures before they clean sweep the filament type bulbs.
But even right now, a massive replacement has already been made by the many.
Every manufacturer is in technological race with the other, one who succeeds in the innovation and removing of any past issue, makes ahead away towards a bulk manufacturing and bulk purchase which in return brings down the development cost.
Low cost, more innovative advantage and head away brings more customers, as everybody on this world is thinking seriously over the savings from power cuts.
Thos who will stay behind in the innovative research and development will be left far behind.
The answer is simple.
The energy crisis is global all over the world.
Every one is seeking first to save more and achieve more, similarly the producers are in a race to make the people help save more and they sell more, and the answer to them is only one, a breakthrough in the technological innovation and be able to address all the technical issues and limitations prevailing now or than at the moment.
The relevancy and the relations of some factors are given below: More demand of energy saving and efficient hardware, brings out more demand, more demand brings out the innovative research, which brings out need to produce more to be able to meet the demand before anybody else does, thus if satisfaction confirmed from the later, more competitive pricing has to be set, because quite parallel to ones research, all competitors have stepped into the same.
Another factor which is of importance is relevant to colder areas where the demand of LED's have increase many folds in spite of all prevailing technical barriers.
LEDs can start emitting light even at -40 degrees C.
Therefore in the most severe conditions also LED keeps on providing where others fail.
As we were discussing the competitiveness, the outdoor use was one of the first concerns for illumination application to gain a foothold in the product segment.
One manufacturer developed a "Light engine", this is what he calls his light, can produce an output of 80 lumens per watt.
Examining the cost of revamping of street lights with HID lamps with a life of 15000 to 25000 hours, the mean time to revamp the replacement could be three times greater that life.
Here we see that added cost of the LED is recovered over time in reduction of lamp maintenance cost.
Source...