Driver Side

• 1). Open the hood.
  
  
• 2). Lift the tab on the lamp cover, using a flat-head screwdriver, then pull off the lamp cover.
  
  
• 3). Press down on the bulb holder and pull it straight out.
  
  
• 4). Pull the used bulb straight out of the holder.
  
  
• 5). Push the new bulb into the holder.
  
  
• 6). Replace the bulb holder by pushing it back into place.
  
  
• 7). Replace the lamp cover and snap the tab back onto the cover to secure it.
  
  

Passenger Side

• 1). Open the hood.
  
  
• 2). Remove the windshield washing system reservoir. Unscrew the screw on the left side of the reservoir and pull it out. Be careful when lifting the reservoir, because it is heavy.
  
  
• 3). Follow steps 2 through 6 from the "Driver Side" section to replace the passenger-side bulb.
  
  
• 4). Reinstall the windshield washer system reservoir.