How to Program a Keyless Remote for a 2005 Chevy K1500
- 1). Sit inside the vehicle and close all the doors. Put the key into the ignition.
- 2). Hold down the unlock button on the driver's door and keep it held down throughout the following steps.
- 3). Turn the key to the "on" position and then back to the "off" position. Repeat this step again, ending in the "off" position.
- 4). Release your hold on the unlock button of the driver's door. The doors will lock and unlock automatically to signal that the vehicle is in programming mode.
- 5). Press both the lock and unlock button on your remote at the same time. Hold them down until the doors lock and unlock. If you are programming several remotes, repeat this step with each one.
- 6). Turn the key back to the "on" position. This will signal the vehicle that you are done programming. Turn the ignition to the "off" position and test your remotes.
Source...