How to Apply Red Paint
- 1). Find a red paint with a thicker base. Red paint tends to be thin, meaning you will need to roll multiple layers of paint on the wall in order to get to the proper color. With a thicker base in the paint, fewer coats should be required.
- 2). Clean the wall or walls that are intended for painting. A porous sponge with a bit of detergent and water works well. Cleaning the walls allows the primer and paint to stick to the walls more thoroughly. Allow the walls to dry thoroughly; leaving them to dry overnight works well.
- 3). Apply one or two layers gray primer or red primer paint. Some red primer paints have more pink hues than red, so be sure to select one that has as much red as possible. If a red primer paint cannot be found, choose a gray primer. These colored primers allow the red to stand out more prominently rather than white primer, which would leave you with pink walls instead. Allow the primer to dry completely.
- 4). Tape off the molding around the room or along the wall being painted, if the red is only going on one wall. This prevents red paint from dripping onto the molding and leaving unsightly splotches.
- 5). Lay a tarp down on the floor. Tarps catch any paint splatters that may occur, keeping them off of your carpet or hardwood floor. If you plan to leave furniture in place as you paint, cover them with a tarp, as well.
- 6). Apply the red paint to the wall or walls with a roller brush. The website How to Faux Finish recommends a brush with a roller nap at 3/8 inches or less, as thicker naps might cause paint splatters and drips. Allow the first coat of paint to dry completely before adding the second. You might have to apply three to four coats before the paint looks the right shade of red.
Source...