How to Install Kreepy Krauly
- 1). Turn off your pool pump and close the main drain and all suction lines, with the exception of the line running from the skimmer basket.
- 2). Take out the skimmer basket. This is where the Kreepy Krauly will connect.
- 3). Screw the compression adapter into the vacuum at the bottom of the Kreepy Krauly.
- 4). Push the automatic regulator valve into the compression adapter so the end of the valve marked "Attach hose this end" is pointing up.
- 5). Put the Kreepy Krauly into the pool, allowing it to sink to the bottom. Feed the hose into the pool so all of the air escapes from the hose and it is completely filled with water.
- 6). Slide the hose protector onto the hose to prevent it from rubbing against the skimmer wall.
- 7). Put the end of the hose into the hole in the skimmer opening and connect the hose to the automatic regulator valve. Your unit is now ready to go.
Source...