How to Dye Merino Wool
- 1). Place your yarn in a large bowl filled with warm water and approximately 1/2 tsp. of liquid detergent. Mix the detergent and water with the yarn, but don't make the water sudsy. Make sure the yarn is completely saturated and under water, adding more water if needed to cover the yarn. Allow the yarn to soak for 20 minutes.
- 2). Determine how dark you want your dye to be. In a plastic container add 1/2 tsp. of dye for a light shade, 1 tsp. to create a standard shade, or 1 1/2 tsp. of dye to make a dark shade. Use a metal spoon and a teaspoon or two of water to mix the dye into a paste.
- 3). Add approximately 1/2 cup boiling water or more to your paste and stir continually until all of the dye powder has dissolved. Put 4 qts. water into your large pot and heat it on the stove top.
- 4). Add the mixed dye liquid to the heated water when it is warm. Add to the dye and water 8 oz. white vinegar and stir well. Lift the yarn from its water bath and allow excess water to drain off until it stops dripping without letting the yarn dry. Slowly lower the yarn into the dye with a wooden spoon.
- 5). Heat the pot of dye and yarn until the dye begins to simmer. Do not heat it so much that the liquid boils. Set a timer for 25 to 30 minutes once the liquid starts to simmer. Stir the yarn slowly for the first 10 minutes to ensure all of the fibers come into contact with the dye.
- 6). Allow the yarn to soak up the dye until the timer goes off. Ideally, the yarn will have soaked up all of the dye, leaving behind clear liquid. Magenta and turquoise may leave some residue behind.
- 7). Lift the yarn out of the liquid with a wooden spoon. Rinse the yarn in hot water, lowering the temperature slowly until the water is running clear and you are rinsing with cold water. Squeeze out the excess water and hang the yarn to dry.
Source...